Xhorse VVDI Key Tool Max + Mini OBD Tool support to program Honda City 2018 ID47 successfully when AKL(all keys lost).
Follow the steps below to learn how to use them.
Generate Remote
Put a smart key to be programmed into VVDI Key Tool Max slot, press
Vehicle remote >> Honda >> City >> Fit(2017-2018) KeylessGo ID47 433M >> Generate remote
Burn success.
Program IMMO
Plug VVDI Mini OBD Tool into OBD2 port.
Connect it with Key Tool Max, press
Immo programming >> Honda >> Select by type >> Smart key system 2 >> Start execution >> All smart keys are lost
Operate according to instructions:
Put a smart key to be programmed inside the car.
Enter the number of keys to be registered, the maximum number is 6.
(I’m gonna program 2 keys, so input “2”.)
Can it operate normally to turn on the ignition switch? No
Press the START/STOP button of the engine.
Whether the ignition switch is turned on? Yes
Take all smart keys out of the car within the 90s, press “OK” to continue.
Take another key to be programmed inside the car within the 80s.
This key registered successfully.
Please turn off the ignition switch.
Please turn on the ignition switch.
Whether indicator light is out? Yes
Please turn off the ignition switch.
Please turn on the ignition switch.
Smart key registration completed!
The matching is completed.
Test Key
Let’s try the 2 keys, both are workable, the remote can work well.
Key programming has done!
This is a tutorial on how to use XhorseKey Tool Max & VVDI Mini OBD Tool to program ID47 for Honda City 2018 all keys lost.
No comments:
Post a Comment