VVDI2 + GODIAG Mech-Key Test Platform Read BMW CAS1

GODIAG BMW Mech-Key Test Platform is used for BMW CAS1/CAS2 mechanical key matching, reading, writing, and synchronization without welding. Compatible with most key programmers like Xhorse VVDI2, Key Tool Plus, etc. To program BMW semi-smart keys, we should use the GODIAG Semi Smart Test Platform.

Following we'll show how to read CAS1 data with VVDI2 + GODIAG.

1. Connect GODIAG, VVDI2 & CAS1 module.

2. Press the GODIAG START button to power it on.

3. Connect VVDI2 to the computer.

Open VVDI2 software, 

Key Learn >> CAS/EWS information >> Connect >> Read EEPROM >> OK

Reading data success.

Save the EEPROM file.

Read KM >> OK

The kilometer stored in CAS is 271905km.

Read Code >> OK

CAS code-DME: 3926

All reading success.

Insert the key into the ignition for a test.

The key is NOT ejected, which means key info is synchronized.

Key Learn >> CAS Key Learn >> Connect >> Get key info >> Add key >> OK

We can see the key has occupied the Key7 position.

Save the original key file.

Done.

www.obd2shop.co.uk