How to duplicate #06 dimple keyway high-security keys using Xhorse XP-007 manual key cutter. It's quick, simple, really easy to do, come along with me.
You'll first need to purchase the keyless factory universal high-security cutter and decoder set for dimple keys, it comes with four of the bits that you can need to do this job, the multi-lock 100, 103 tracer as well as the multi-lock 90c and 93C cutters.
that's first going to start here with the canard original on the left side, here are blank 100 guides here on the right side and are 90C cutter on the left side inside this little spring here, that is the actual probe that is guiding us to cut so we want to make sure that this is what hits first.
So make sure that tip is touching not just the tip of the spring part, and then we bring him down to level. I do is make sure that this little guide point here on the print side is fully in your double before you start your car, you want to line that up, make sure it's nice and set and then finalize your touchdown, make sure your calibration beforehand, you don't want to overcome anything.
Real quick flip line it back up to our shoulders stop and get right back to it, okay with those cuts down we're going to go ahead and get these taken out.
Now moving onto our 93c cutter and 103 guides same deal here you're going to make sure that you line up the guide, first height-wise for the z-axis before you line up your cutter to make sure you can't overcut, these holes.
Okay, we're ready to cut, we got our cylinder we got our newly cut key, let's give that a test, that's a perfect turn.
Xhorse XP-007 along with this keyless factory four-pack of dimple cutters and guides worked out perfectly.
No comments:
Post a Comment