The Xhorse VVDI Key Tool Plus has successfully added functionality for programming smart keys on the 2020 Toyota Camry via the OBD-II port. Here is a detailed procedure using an original key as a reference.
Step-by-Step Programming Guide:
1. Navigate through the menu: Key programming >> ASIA >> Toyota. Select the model: Camry >> Keyless Go >> 2019- >> Type 1 (8A - Page P4 A8/A9/AA) >> Start programming >> Add smart keys.
2. The tool will display a prompt regarding EEPROM data. If you backed up the data via OBD, ignore it. If you just used adapter-backed data, restore the vehicle first. Press Yes.
3. An internet connection is required. The function allows the use of a registered original or emergency start key to add a new one. Press OK.
4. Turn the ignition to the ON position (instrument panel lights on). The Key Tool Plus will display the software number. Press OK.
5. The screen will show the current number of registered keys and the number of keys that can still be registered (e.g., Registered: 2, Remaining: 5). Note that the maximum key count may be inaccurate for some models. Press OK.
6. Crucial Step: Within 30 seconds of pressing OK, continuously touch the ignition switch with the sign surface of a registered key.
7. Immediately after, within 30 seconds, touch the ignition switch with the sign surface of the new key to be registered.
Note: One beep means you should move the key farther away. Two beeps indicate successful programming. Press OK.
8. Keep the key touching the ignition switch and wait for the registration to complete. A "Key registration succeeded!" message will appear, updating the key counts (e.g., Registered: 3, Remaining: 4).
Important Note: After programming is complete, if the key remote control does not function, use the [Synchronize ECU and ID] function in the tool (multiple attempts may be needed) to sync the remote code.
No comments:
Post a Comment