Free Download Xhorse VVDI PROG latest software V4.7.8

Good news!! Xhorse VVDI PROG key programmer software version can be updated to V4.7.8. Here provides you the free download link and more details.

VVDI PROG V4.7.8 Free download:
https://mega.nz/#!a05WDKST!vWq8IvDrRwlBWA5nC5-bn_bHtu8chagxT9mUq-8_WvE
Password:123456

VVDI PROG V4.7.8 Update content:
Update time: 2018-12-21
This version DON't need update firmware

+ Add VVDI PROG USER MUNUAL 4.7.8 version in Doc folder

+ Add R5F100XXX_Data_4KB_Read, R5F100XXX_Data_4KB_Write, R5F100XXX_Data_8KB_Read, R5F100XXX_Data_8KB_Write, R5F100/101xEx_Flash_64KB_WRITE,
R5F100/101xEx_Flash_64KB_Read, R5F100/101xEx_Flash_64KB_Write, R5F100/101xAx_Flash_16KB_Read, R5F100/101xAx_Flash_16KB_Write, R5F100/101xCx_Flash_32KB_Write,
R5F100/101xCx_Flash_32KB_Read, R5F100/101xCx_Flash_48KB_Write, R5F100/101xCx_Flash_48KB_Read, R5F100/101xCx_Flash_96KB_Read, R5F100/101xCx_Flash_96KB_Write,
R5F100/101xCx_Flash_128KB_Read, R5F100/101xCx_Flash_128KB_Write, R5F100/101xCx_Flash_192KB_Write, R5F100/101xCx_Flash_192KB_Read, R5F100/101xCx_Flash_256KB_Read,
R5F100/101xCx_Flash_256KB_Write, R5F100/101xCx_Flash_384KB_Write, R5F100/101xCx_Flash_384KB_Read, R5F100/101xCx_Flash_512KB_Read,R5F100/101xCx_Flash_512KB_Write
options in <2-MCU>-><RENESAS-R5F>

+ Add MG3(2013) options in <5-DASHBOARD>-><SAICMOTOR>

+ Add MG3(2013) options in <5-DASHBOARD>-><SAICMOTOR>

+ Add WEIWANG-E50F(2018) options in <5-DASHBOARD>-><BAICMOTOR>

+ Add WEIWANG-S50 options in <5-DASHBOARD>-><BAICMOTOR>

+ Add AX7 options in <5-DASHBOARD>-><DONGFENG>

+ Add MONDEO(2017) options in <7-AIRBAG>-><FORD>

+ Add CIVIC(2016) options in <7-AIRBAG>-><HONDA>

+ Add SANTAFE-72 options in <7-AIRBAG>-><HYUNDAI>

+ Add MONDEO-AIR-CONTROLLER- MODULE(2007) option in <8-OTHER><VOLKSWAGEN>

Q & A on VVDI2 BMW FEM USA 433 Mhz key programming not working

Post starts with the problem that BMW FEM USA 433 Mhz key programming is not working, then followed with the answers and questions between two users.

key added but key still in unlock state -> remote not working just start if I put key near to steering column key mark

and this has happened to me when I try to add key to an e60 with key-less go function,

with the latest version of sw I think was VVDI2-InstallerV560 key programming was not ok (remote and key-less go function not working but car start if i inset key in slot)

and with VVDI2-InstallerV550 key programming was ok remote and key-less go function working

Answer:
Add key to FEM is made automatically FEM software
VVDI only Login module and next step is done by FEM itself,
There is nothing write during key program etc, FEM must recognize KEY, and add it etc
This is typical problem is you SWAP data from FEM to FEM and not unlock and add KEy again KEY after that, or key is not correct, or you unlock key with bad file
Proper key unlock + VVDI, and no problem at all.

Q: 
Add key to FEM is made automatically FEM software -> if this is the case then my opinion is that the FEM USA CAR is flashed with a bad file.

VVDI only Login module and next step is done by FEM itself, -> a brand new 2000 km car from USA why would not do this? 3 key is registered in FEM

There is nothing write during key program etc, FEM must recognize KEY, and add it etc -> has I write key added in the key list but PCF is still in unlock state so somebody must lock PCF

This is typical problem is you SWAP data from FEM to FEM and not unlock and add KEy again KEY after that, -> not the case car was not touched before me and have a working key

or key is not correct,-> I take a key from eBay USA more I buy from https://auto-keys.eu/index.php?route=product/product&path=179_369&product_id=42300

or you unlock key with bad file -> do you think that barracuda make a bad job?

Proper key unlocks + VVDI, and no problem at all -> well did you make a key with it with the latest sw of VVDI for FEM USA CAR ? only after that is proper to say -> "VVDI, and no problem at all "

because
" and this has happened to me when i try to add key to an e60 with key-less go function,

with the latest version of sw i think was VVDI2-InstallerV560 key programming was not ok (remote and key-less go function not working but car start if i inset key in slot)

and with VVDI2-InstallerV550 key programming was ok remote and key-less go function working

and this is for sure because i try 2 times but now i cannot use older version because of firmware !!!!"
and regarding e60 if I remember well because the job is more than 5 mounts old with both VVDI sw learning key with ignition was not ok and by programmer with older version of sw than the latest one key become functional.

http://blog.obd2shop.co.uk/solution-to-vvdi2-bmw-fem-usa-433-mhz-key-programming-not-working/

Xhorse VVDI MB TOOL latest software version V4.6.0 update

Good news!! Xhorse VVDI MB TOOL software can be updated to V4.6.0 version, please keep reading to find out more details.

VVDI MB TOOL V4.6.0 download link:
https://mega.nz/#!DoQDBSoB!sK0lBQa2gWJShDP9PyMRhi6CGZ6rjo8ex6qO7OnY9fk

VVDI MB TOOL V4.6.0 update details:
update time: 2018-12-04 
Require firmware: V4.5.0 

1. Password calculation: Bugfix for W169/W209/W211(Kline) while all key lost
2. Bugfix for reading W164 2009- in EIS
3. MB power adapter: When client use pirated MB power adapter to upload calculation data will get detail error
4. Bugfix

http://blog.obd2shop.co.uk/free-download-xhorse-vvdi-mb-tool-latest-software-v4-6-0/

Free Download Xhorse VVDI PROG latest software V4.7.7

Good News!! Xhorse VVDI PROG Key programmer latest software version V4.7.7 can be updated. Here provide you the free download link and more details.

VVDI PROG V4.7.7 Free download link:

https://mega.nz/#!usJ1AaoI!iwLDnwEu7d5nKnYcM3xLjtlA6xy8GB6MJdfDH0MJdTo

password: 123456

VVDI PROG V4.7.7 update detail info:

Update time: 2018-11-28

This version DON't need update firmware

+ Add VVDI PROG USER MUNUAL 4.7.7 version in Doc folder
+ Add M35128(ADAPTER) M35160WT(ADAPTER) options in <1-EEPROM&FLASH>-><ST> (Need M35160WT ADAPTER)
+ Add MB89F538, MB89F538L, MB89F499, MB91F211, MB91F213, MB95F108B, MB95F166, MB95F108AM, MB95F118M,
MB95F118B, MB95F128, MB95F128MB, MB95F168MA, MB95F156M, MB95F136MB, MB95F116MA options in <2-MCU>-><FUJITSU-MB9XF>
+ Add BENBEN-EV(2018) option in <5-DASHBOARD>-><CHANGAN>
+ Add FENGGUANG-330(2015) option in <5-DASHBOARD>-><DONGFENG>
+ Add CRUZE(2012) option in <7-AIRBAG>-><CHEVROLET>
+ Add 5-SERIES-F18-SUNROOF-COMPUTER option in <8-OTHER><BMW>
+ Add PHAETON-REAR-DOOR-ROCKING option in <8-OTHER><VOLKSWAGEN>

http://blog.obd2shop.co.uk/free-download-xhorse-vvdi-prog-latest-software-v4-7-7/

Xhorse CONDOR XC-MINI Plus Key Cutting Machine comes soon!!!

Good News!! Xhorse CONDOR XC-MINI Plus Key Cutting Machine is coming soon!!!

As an upgraded version of Xhorse Condor Mini. CONDOR XC-MINI Plus has a large upgrade in the display, protective cover and anti-iron filing, which is more convenient for the daily use of the locksmiths.

CONDOR XC-MINI Plus

Xhorse Condor Mini

CONDOR XC-MINI Plus info:

Mini PLUS is available with Chinese and English versions. The package comes with 4 kinds of power adapters incl. Chinese standard, British standard, American standard, and European standard. 

Condor mini plus parameter:

Working Temperature 0-50

Humidity: 10-90%

Working Voltage: 90-264V/AC

Input Frequency: 47-63Hz

Package Dimension: 450 x450x350mm

Machine Dimension: 265 x362x301mm

Net Weight: 18kg

Gross Weight: 22.9kg

Power: 200W

USB port: 2.0

LED Display:

1024×600

Motor Rotation Speed: 9000rpm

CONDOR XC-MINI Plus VS Condor Mini:

Condor Mini PLUS and Condor Mini share the same clamp, cutter, probe and portable battery & power supply and other accessories, Condor Mini PLUS package come with M1 and M2 clamp. 

Condor Mini PLUS and Condor Mini share the same binding policy, for example, Mini PLUS also can combinate with VVDI MB to enjoy one free token each day.  

For more details will be updated soon on obd2shop, please understand for any inconvenience.

How to make key for Benz W176 with VVDI MB BGA Tool?

I use VVDI MB BGA TOOL to make key for w176 2013 year, work 100%.

We start by reading the cars data via OBD, this takes about 20 minutes.

We now program the key data into the new key.

Insert the MB key into VVDI MB Tool by following the instruction.

Now put the key into ignition and it will now start the key teach in process and central locking will start to work.

Cutting Emergency blade.

Done.

www.obd2shop.co.uk

V5.8.0 Xhorse VVDI2 Commander Key Programmer New update!

Xhorse VVDI2 Commander Key Programmer software new version V5.8.0 is released. This post will provide you the free download link, please keep reading to find out more.

VVDI2 V5.8.0 Free download link:

https://mega.nz/#!YO5XDDrT!X_Ha8J13x3oJUO9Mrlv6137j3Y9s57ORVcpA_YV3nSQ

Xhorse VVDI2 V5.8.0 update content:

update time: 09-2018
Require VVDI2 firmware V5.8.0

VAG V5.8.0
1. Bugfix for reading PIN/CS from old Touareg ECU, manually select type is: MED9.1 single
2. Bugfix for reading PIN/CS from old Bentley ECU, manually select type is ME7 slaver
3. Improvement for autodetect VAG immobilizer system
4. Flash VAG firmware(frf, odx, sgo): support flash VAG firmware bigger than 300M, support flash virtual cockpit cluster
5. Bugfix

BMW V5.8.0
1. FEM/BDC system add reset ECU lock(Usually used after exchange FEM/BDC)
2. Improvement for FEM/BDC key learning
3. Support read E-Series ECU synchronize code via OBDII: MEV9N46, MEV9N46L, N62_TUE, N62_TUE2, MS450DS0, MSS60, MSV70 etc
4. Bugfix

Transponder Programmer V5.8.0
1. Improvement for Rover/Jaguar(2015-) MC9S12EXT256/MC9S12EXQ384
2. Bugfix for new wireless remote
3. Immobilizer data tool: Bugfix for Euro->Peugeot->C1 24C04
4. Immobilizer data tool: Add support for Aisa->China Immobilizer box: JIAOTONG/LIANCHUANG/DELPHI/TONGZHI
5. Bugfix

www.obd2shop.co.uk

Program Chevrolet Sonic 2014 with vvdi key tool & obdstar DP plus

Program Chevrolet Sonic 2014 when all smart all keys lost, read pin code by OBDII (No need to read from BCM), generate remote with VVDI Key tool.
Program chip by OBDSTAR DP Plus (=Key master DP plus in the functions and coverage, the difference is the color).

Generate remote by VVDI Key Tool.
Program and read pin code with OBDSTAR DP Plus

Generate chip and remote by VVDI Key tool

Use XN remote (Chip on board)

After program chip, the remote also worked.

Chevrolet -Sonic ID46 1815 : press [Gen]

Burn success - Chip 46 ASK 433Mhz

Install remote module into remote shell.

Read pin code by OBDII with OBDSTAR DP Plus.
Turn on ignition

No need to read from BCM box.

GM - GM V31.11 - Read Security code - by OBDII

By BCM system -Auto - read pin code.

Loading for a while.

Readout pin code.

Program Chip and remote

Tap Immobilizer -select from vehicle - Chevrolet.

Sonic - 2012-2015 - Without smart - All keys lost

Fill in the pincode.

Switch off wait 5 seconds then ON.

System configuration, please wait 10 minutes.

Security light steady.
After 10 minutes, the security light go off.

Switch off and pull out the key.

Open and close driver door 1 time.

Turn on

Whether to program next key? Press Yes.

Switch off and pull out the key.

Insert new key and turn ignition on.

System configuration......

Switch off and pull out the key.

Open and close driver door 1 time.

system configuration...

Turn ignition on.

Whether to program the next key.
Press NO (program 2 keys only).

Switch off and pull out the key.

Open and close driver door 1 time.

System configuration, please wait 45 seconds.

Turn on.

Now the security light go off.

Switch off.

Program success.

the security light go off.

Test start and remote.

Done.
OBDSTAR DP Plus + VVDI key tool is wonderful combination.

Article source: http://blog.obd2shop.co.uk/program-chevrolet-sonic-2014-with-vvdi-key-tool-obdstar-dp-plus/

Xhorse VVDI PROG latest software version V4.7.4 update

Good News!! Xhorse VVDI PROG Key Programmer can be updated to V4.7.4. Here are the free download link and the details for you.

VVDI PROG Software V4.7.4 download:

https://mega.nz/#!z5whGbbC!z49-q6RnBTPbIiRtYxoTjdl0h_-h1NivvSBxVFAsV_4

V4.7.4 Update time: 2018-08-27
* This version DON't need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.7.4 version in Doc folder
+ Add MX25L512E, MX25L1005, MX25L1025, MX25L1006, MX25L1026, MX25L2005, MX25L2006, MX25L2025, MX25L2026, MX25L4005, MX25L4006, MX25L4025,
MX25L4026, MX25L4033, MX25L4035, MX25L8005, MX25L8006, MX25L8025, MX25L8032, MX25L8035, MX25L8036, MX25L8073, MX25L1602, MX25L1605, MX25L1606,
MX25L1608, MX25L1633, MX25L1635, MX25L1636, MX25L1655, MX25L1673, MX25L3205, MX25L3206, MX25L3208, MX25L3225, MX25L3235, MX25L3236, MX25L3239,
MX25L3255, MX25L3273, MX25L6405, MX25L6406, MX25L6408, MX25L6435, MX25L6436, MX25L6445, MX25L6446, MX25L6455, MX25L6465, MX25L6473, MX25L12805,
MX25L12833, MX25L12835, MX25L12836, MX25L12845, MX25L12865, MX25L12873 options in <1-EEPROM&FLASH>-><MXIC>
+ Add MX25L1025(CLIP), MX25L512E(CLIP), MX25L1005(CLIP), MX25L1006(CLIP), MX25L1026(CLIP), MX25L2005(CLIP), MX25L2006(CLIP), MX25L2025(CLIP), MX25L2026(CLIP), MX25L4005(CLIP),
MX25L4006(CLIP), MX25L4025(CLIP), MX25L4026(CLIP), MX25L4033(CLIP), MX25L4035(CLIP), MX25L8005(CLIP), MX25L8006(CLIP), MX25L8008(CLIP), MX25L8025(CLIP), MX25L8032(CLIP),
MX25L8035(CLIP), MX25L8036(CLIP), MX25L8073(CLIP), MX25L1602(CLIP), MX25L1605(CLIP), MX25L1606(CLIP), MX25L1608(CLIP), MX25L1633(CLIP), MX25L1635(CLIP), MX25L1636(CLIP),
MX25L1655(CLIP), MX25L1673(CLIP), MX25L3205(CLIP), MX25L3206(CLIP), MX25L3208(CLIP), MX25L3225(CLIP), MX25L3236(CLIP), MX25L3239(CLIP), MX25L3255(CLIP), MX25L3273(CLIP),
MX25L6405(CLIP), MX25L6406(CLIP), MX25L6408(CLIP), MX25L6435(CLIP), MX25L6436(CLIP), MX25L6445(CLIP), MX25L6446(CLIP), MX25L6455(CLIP), MX25L6465(CLIP), MX25L6473(CLIP),
MX25L12805(CLIP), MX25L12833(CLIP), MX25L12835(CLIP), MX25L12836(CLIP), MX25L12845(CLIP), MX25L12865(CLIP),
MX25L12873(CLIP) options in <1-EEPROM&FLASH>-><MXIC(CLIP)>(Need EEPROM CLIP ADAPTER)
+ Add W25P10, W25P20, W25P16, W25P32, W25P40, W25P64, W25P80, W25Q10, W25Q16, W25Q20, W25Q32, W25Q40, W25Q64, W25Q80, W25X10, W25X16, W25X20,
W25X32, W25X40, W25X64, W25X80, W25P128, W25Q128, W25X128 options in <1-EEPROM&FLASH>-><WINBOND>
+ Add W25P10(CLIP), W25P16(CLIP), W25P20(CLIP), W25P32(CLIP), W25P40(CLIP), W25P64(CLIP), W25P80(CLIP), W25Q10(CLIP), W25Q16(CLIP), W25Q20(CLIP),W25Q32(CLIP),
W25Q40(CLIP), W25Q64(CLIP), W25Q80(CLIP), W25X10(CLIP), W25X16(CLIP), W25X20(CLIP), W25X32(CLIP), W25X40(CLIP), W25X64(CLIP), W25X80(CLIP), W25P128(CLIP),
W25Q128(CLIP), W25X128(CLIP) options in <1-EEPROM&FLASH>-><WINBOND(CLIP)> (Need EEPROM CLIP ADAPTER)
+ Add XC886CM-8FFI-5V, XC886-6FFI-5V, XC886-8FFI-5V, XC886C-6FFI-3.3V, XC886C-6FFI-5V, XC886C-8FFI-5V, XC886CM-6FFI-5V, XC886LM-6FFI-3.3V, XC886LM-6FFI-5V, XC888-6FFI-5V,
XC888-8FFI-5V, XC888C-8FFI-5V, XC888CLM-8FFI-5V, XC888CM-8FFI-5V, XC888LM-8FFI-5V, XC888CM-8FFI-3.3V, XC888LM-8FFI-3.3V, XC878CM-16FFI-5V, XC878M-13FFI-3.3V, XC878M-13FFI-5V,
XC878M-16FFI-3.3V, XC878M-16FFI-5V, XC878-13FFI-3.3V, XC878-13FFI-5V, XC878-16FFI-5V, XC878CM-13FFI-5V, XC878CM-16FFI-3.3V, XC858CA-16FFI-5V, XC858CA-13FFI-5V options in
<2-MCU>-><INFINEON-XC8XXXX>
+ Add ALSVIN(2012) option in <4-IMMOBILIZER>-><CHANGAN>
+ Add AUNEAU-DELPHI-48 option in <4-IMMOBILIZER>-><CHANGAN>
+ Add VERNA(2017) option in <5-DASHBOARD>-><HYUNDAI>
+ Add K5(2015) option in <5-DASHBOARD>-><KIA>
+ Add S50(2018) option in <5-DASHBOARD>-><BAICMOTOR>
+ Add SANTAFE option in <7-AIRBAG>-><HAWTAI>
+ Add AVANTE(2017) option in <7-AIRBAG>-><HYUNDAI>
+ Add VV7-AIR-CONTROLLER option in <8-OTHER>-><GREATWALL>
+ Add MUSTANG-LEFT-DOOR-WINDER option in <8-OTHER>-><FORD>
+ Add ROEWE-PDC option in <8-OTHER>-><SAICMOTOR>
+ Add TIGUAN-HEADLIGHT-CONTROLLER option in <8-OTHER>-><VOLKSWAGEN>

https://xhorse-tools.blogspot.com/

VVDI MB TOOL V4.1.0 update: support W202(KLine) EIS Password calculation

Here is the Xhorse VVDI MB key programmer V4.1.0 free download link and update info.

vvdi mb software download:

https://mega.nz/#!jwZB2CwC!tYiYsbfvMU9_8NtyUtSEsfE30mNzFo7r9SIZdjKaWI0

Update time: 2018-07-13
Require firmware V4.0.0

Detail info:
===== BENZ V4.1.0 =====

1. This update no need update the firmware

2. Password calculation: Support calculate password for W202/W208/W210(KLine) EIS

a. No more need MCU's de/soldering, very safe and quickly

b. Support add key and lost all key for password calculation

c. The procedure require about 25-30 minutes

d. The procedure need MB Power Adapter support

e. The procedure should work on the bench, not on car

3. Bugfix for load motorola EEPROM dump file in EIS window

4. Bugfix for activate BE key

5. Bugfix for read EIS W209

6. Bugfix

Article source: http://blog.obd2shop.co.uk/xhorse-vvdi-mb-tool-v4-1-0-update-support-w202kline-eis-password-calculation/

Xhorse VVDI PROG Programmer good review from customer

Recently, we received a review of Xhorse VVDI PROG from Mr. Mariusz Mysona:

Xhorse is one of best companys which releases product with future support !
That easly let You invest even bigger amount of money coz no need worry will have to replace tools in near future !

Iv had pleasure (and not pleasure) to make purchases at many websites !
As can guess experience from customer support and quality products was vary !
Begins from member stuff which does not know even what they selling throught ignoration and complete no support or even answer especially aftersale !

OBD2shop as far cumulate best products at one website ! Online chat is always able to help so every time if has any questions or hesitation with choice You are able to ask about any details stuff which is experienced (regards for Elyza) !

So guys no worries with purchase at OBD2shop but....

You have enter in at Your own responsbility :D I had left nearly £1K with few first purchases...
... so believe me, shopping here can be addictive :D

Thanks Mr. Mariusz Mysona good review for us!

We are Authorized Xhorse Dealer. Purchasing from us, you will get 100% genuine Xhorse Device. More details please check our site: obd2shop.co.uk

New arrival Xhorse Condor XC-009 Key Cutting machine

Xhorse Condor XC-009 is designed to cut single-sided keys and double-sided keys. Here I will show more details about it.

Condor XC-009 highlights:

1. The first horizontal cutting machine
2. Lighter weight, about ten kilograms, easier to take out
3. Two configurations with multiple options
4. Built-in lithium battery lasts longer
5. Four directions fixture to switch freely
6. Better design with more beautiful outlook
7. Excellent material
8. This is nothing more than the most professional key expert around you

Xhorse Condor XC-009 pictures Display:

XC-009 Key cutter Function:

It can cut all kinds of flat cylinder keys for most bikes, cars & door locks in India.

XC-009 Key cutter Battery:

In one single charge, XC-009 can cut upto 60-100 keys.

Condor XC-009 Features:

1. Advantage:
Small volume, light weight, easy to carry.

2. High Precision:
With adapters guide equipment, guarantee high cut precision.

3. Wide Applicability:
Equipped with 4-side clamp, flexible exchange among 4-side. Different sides for different features keys, cut kinds of special keys, wide applicability.

4. Safe & Low Noise:
Emergency switch is able to turn off the power in emergency and start the machine while it’s safe.
Low noise DC brushless motor.

5. Super Long Endurance Ability:
Build-in six 63W.h (2500mA.h) battery cut 60-100 keys continuously.

6. Solid & Durable:
Aluminum structure, processed by DMG precise machine which is imported from Germany.

7. Humanized Design:
Battery value remind function, hidden hand wheel, big clamp space, cut the big plastic cover keys that don’t need to tear down, streamline handrail design, comfortable operation experience.

8. Support Service:
One year warranty, lifelong technical support for free, professional online service provides remote instruction and assistance.


Condor XC-009 Parameter:

Motor rotation speed     1800rpm
Clamp space     95mm
Working temperature     0-50°C
Humidity     10~90%
Machine size     285*175*180mm
Power 200W
Power Parameter 12-18V/3A
Motor Torque 1.2 Nm

Condor XC-009 Key Cutting machine sales on obd2shop.co.uk: http://www.obd2shop.co.uk/wholesale/xhorse-xc-009-key-cutting-machine.html

Condor XC-009 cutts key video: