Customer Problem: When I use the VVDI Key tool max to program XEDS01EN DS Style Super Remote, I get this message:
Solution: Try to update VVDI Key Tool Max to the latest version.
Customer Feedback: It works, thanks!
To learn more about Xhorse Key Tool Max, please follow http://blog.obd2shop.co.uk/
Xhorse VVDI Key Tool Max can read Kia/Hyundai ID46 pin code successfully, so does Mini Key Tool. Today I’m gonna try it on a Kia Sorento XM 2013 using a working key ID46 chip.
Firstly, make sure Key Tool Max is connected with WIFI.
Put the working key into Key Tool Max coil, let’s start:
Transponder clone >> Read transponder >> Clone >> Start clone >> Kia/Hyundai password >> Original key clone(recommend) - long distance snifter
It is sniffing data...so place Key Tool Max as close as the programming slot here and insert the working key to turn it on.
Snifter data success.
It is asking to put the working key into Key Tool Max coil again.
Wait for calculating data until 100%...
Calculate success.
Pin code was readout.
Now you can use the Kia pin code to program keys.
Using VVDI Key Tool Max Key Programmer to calculate a Kia Sorento XM 2013 ID46 pin code is such easy to be done!
This is an operation demonstration of how Xhorse Dolphin XP005 cutting a Ford Tibbe key when all key lost.
Firstly, connect Dolphin XP005 to XhorseVVDI Key Tool MAX via Bluetooth for smart control. Once connecting successfully, Dolphin XP005 machine will be ready.
Go to VVDI Key Tool MAX app, let’s start:
All key lost >> Ford >> Enter lock number “T0555”
M3 clamp and the key were already installed on the Dolphin XP005 machine.
OK >> Cutting key >> Continue
Follow the prompts to turn over the key to Aside 1 position, press “Continue”.
Dolphin XP005 starts cutting keys...
It prompts to turn over the key again, follow to operate, press “Continue”.
It will prompt several times to turn over the key, just do it as before.
The Dolphin XP005 machine is cutting around the key...
Wait until 100%, cutting key completed, press “OK” and take out the key.
The key has been cut all side around, try it on a Ford lock, it is successful to open!
Key cutting has done!
This is how to use Dolphin XP005 Key Cutting Machine to cut a Ford Tibbe key when all key lost. It should be working with the VVDI Key Tool MAX app on a smartphone.
Hello there guys, I have recently received this Xhorse VVDI Key Tool Max programmer, today I am going to clone a key for Ford Focus to have a try.
Now I am working on the car already, this is the original Ford key, put it into VVDI Key Tool Max coil to detect, press "Transponder Clone".
Read transponder >> Clone >> Start clone
Successful data upload…
Query calculate success…
Remove the original key, and put the blank new key into the coil. The blank new key is a VVDI Super Chip I bought them separately. It is much better than actually using the correct chip, you can use a VVDI chip for pretty much anything.
As you can see, it is cloned and done, press “Complete”.
Let me check if it can work normally. Yes, it works perfectly!. I’m now back to “Transponder Clone” for a check. All right, it has been programmed.
VVDI Key Tool Max Remote Programmer is a simple device to use, fast to clone a Ford key in 2 minutes. It is a brilliant bit of kit if you can afford to splash out.
http://blog.xhorse.co.uk/xhorse-vvdi-key-tool-max-clone-a-ford-key-in-2-mins/
