Cutting VW Beetle HU66 Keys with Xhorse Dolphin XP005

This guide shows you how to use the Xhorse Dolphin XP005 Key Cutting Machine to cut a HU66 key for a 2000 Volkswagen Beetle in an All Keys Lost (AKL) situation.

We’ll also connect the VVDI Key Tool Max with the Dolphin XP005 for operation. Alternatively, you can control the process directly via the Xhorse App installed on a smartphone.

Step 1: Select Key and Enter Code

From the main menu, select All Keys Lost → Volkswagen

Enter the key code: 0798

Select HU66, 8 bitting, 820×2800

Step 2: Set Up the Key Blank

Install the M2-C clamp with the shoulder aligned as prompted

Place the HU66 key blank flat and secure it in the clamp

Press “OK” to confirm

Step 3: Decode and Verify Bitting

The decoded bitting code is: 22433444

Always double-check the code for accuracy before proceeding

Step 4: Begin Cutting

Select Cutting Key → Continue

The Dolphin XP005 will start cutting the first side automatically

Step 5: Flip and Cut the Second Side

Once the first side is complete, clean any metal debris

Remove the key, flip it over, and reposition it flat in the clamp

Press Cutting Key → Continue again

The machine will proceed to cut the reverse side

Step 6: Test the Key

After cutting is complete, test the key in the vehicle’s lock

The key turns smoothly and operates perfectly

Done!

The HU66 key has been successfully cut for the 2000 Volkswagen Beetle using the Xhorse Dolphin XP005 key cutting machine.

www.obd2shop.co.uk

Xhorse FT-OBD Mini: Toyota Key Programming Guide

In this guide, we’ll show you how to add and delete smart keys on a 2017 Toyota Camry using the Xhorse FT-OBD Mini Tool, working together with VVDI Key Tool Max or Key Tool Max Pro.

Since we have the original working key, the process is straightforward. Let’s get started.

Step 1: Connect and Enter Programming Menu

1. Connect the Toyota Mini Tool to the vehicle’s OBD port.

2. On the VVDI Key Tool Max / Max Pro, navigate to:

Select from Model → Camry → Keyless Go → 2013–2017 →

Type 1 (8A – Page P4 88) → Step 3 – Adding Keys → Start Execute → Clear Smart Keys

Step 2: Clear Existing Smart Keys

Follow the on-screen instructions:

Turn the ignition ON (instrument panel lights up).

The system will display:

Number of registered keys: 1

Number of keys remaining to be registered: 6

Press OK.

Next:

Touch the IGNITION (IG) switch with a registered key (logo side facing the switch).

Complete the operation within 30 seconds after pressing OK.

Once finished, you’ll see:

Clear completed!

Step 3: Add a New Smart Key

Now select "Add Smart Keys."

1. Turn the ignition ON again.

2. Press OK.

3. Within 30 seconds, touch the IG switch with a registered key using the marked surface.

The system will display:

Key detected, programming…

Keep the key touching the ignition switch.

Wait until the registration process is fully completed.

After successful programming:

Number of registered keys: 2

Number of keys remaining to be registered: 5

The matching is completed.

Final Check

1. Turn the ignition OFF.

2. Test both smart keys:

Remote functions work normally

Vehicle starts successfully

Key adding and deletion completed.

www.obd2shop.co.uk

Changing XKGHG1EN Garage Remote Frequency with Key Tool MAX Pro

This guide provides step-by-step instructions on disassembling the XKGHG1EN Masker Garage Remote and modifying its frequency using the Xhorse VVDI Key Tool MAX Pro.

Step 1: Disassembling the XKGHG1EN Garage Remote

1. Remove the key cover:

Peel off the Xhorse logo sticker.

Use a screwdriver to remove the back screw.

2. Open the remote:

Take off the back cover.

Carefully remove the PCB board from the remote casing.

Step 2: Changing the Garage Remote Frequency

1. Connect the remote to VVDI Key Tool MAX Pro:

Use a USB cable to link the garage remote to the device.

2. Access the frequency settings:

Go to Special Function > VVDI Remote Function > Garage Door Key Customization > Read.

The current frequency (e.g., 315MHz) will be displayed.

3. Modify the frequency:

Click on the 315MHz value and enter the new frequency (e.g., 433MHz).

Click on the 055 (offset value in KHz) and adjust it within the allowed range.

4. Save the settings:

Click "Settings" to confirm the changes.

A "Successful Setup" message will appear.

5. Verify the new frequency:

Re-read the remote frequency to confirm it has changed (e.g., now 433MHz).

Conclusion

With the Xhorse VVDI Key Tool MAX Pro, modifying the XKGHG1EN Garage Remote frequency is a quick and straightforward process. Follow the steps above to adjust the frequency as needed.

For more information, visit: www.obd2shop.co.uk