Showing posts with label xhorse adapter. Show all posts
Showing posts with label xhorse adapter. Show all posts

Wednesday, 5 November 2025

How to Use Xhorse AO.D BCM2 Adapter with Key Tool Plus

This guide provides step-by-step instructions on using the Xhorse AO.D BCM2 adapter to read a vehicle's DFLASH and PFLASH memory and calculate immobilizer data. The new version of the adapter supports all BCM2 series, including 03xx, 04xx, 05xx, 06xx, 07xx, and 08xx.


While this adapter is compatible with both the Multi Prog and Key Tool Plus, this article will use the Key Tool Plus as an example.


Step 1: Hardware Connection


1. Identify the correct adapter for your specific Audi BCM2 module. There are two adapters (Adapter A and Adapter B) for different modules.

2. Carefully check that the adapter pins align correctly with the module. Ensure the FLMD, GND, and VRCG pins are in the correct positions. Refer to the wiring diagram and select the appropriate adapter.


how-to-use-xhorse-ao-d-bcm2-adapter-with-key-tool-plus-1

3. This demonstration uses Adapter A. Align the pin positions and connect the adapter to the BCM2 module.

4. Flip and snap the two side buttons on the adapter to lock it securely onto the module.


how-to-use-xhorse-ao-d-bcm2-adapter-with-key-tool-plus-2

how-to-use-xhorse-ao-d-bcm2-adapter-with-key-tool-plus-3

how-to-use-xhorse-ao-d-bcm2-adapter-with-key-tool-plus-4

5. Use the Key Tool Plus Adapter Cable to connect the assembled unit (BCM2 module + adapter) to your Key Tool Plus device.


Step 2: Software Navigation & Reading Data


1. On your Key Tool Plus, navigate to the following menu path:

Immo Programming >> Audi >> Select by type >> Fifth Immobilizer System >> Start programming


how-to-use-xhorse-ao-d-bcm2-adapter-with-key-tool-plus-5

how-to-use-xhorse-ao-d-bcm2-adapter-with-key-tool-plus-6

how-to-use-xhorse-ao-d-bcm2-adapter-with-key-tool-plus-7

how-to-use-xhorse-ao-d-bcm2-adapter-with-key-tool-plus-8

2. Select "Read BCM2 Data".

Tip: The new adapter uses a different menu entry. If you are using an old version adapter, you would need to enter the "Old Adapter" menu.

3. For the new version adapter, choose "Programmer Read (New Adapter)".


Step 3: Reading DFLASH and PFLASH

A. Read DFLASH

Select the chip "D70F3381_3634".

Choose "D-FLASH".

You can view the wiring diagram for reference on the screen. Click "Read" to read the DFLASH data.

Tip: Ensure the adapter and chip are properly connected.


how-to-use-xhorse-ao-d-bcm2-adapter-with-key-tool-plus-9

how-to-use-xhorse-ao-d-bcm2-adapter-with-key-tool-plus-10

how-to-use-xhorse-ao-d-bcm2-adapter-with-key-tool-plus-11

how-to-use-xhorse-ao-d-bcm2-adapter-with-key-tool-plus-12

The message "Read successfully" will appear when the task is completed.


B. Read PFLASH

Select the chip "D70F3381_3634" again.

This time, choose "P-FLASH".

Click "Read" to read the PFLASH data.

how-to-use-xhorse-ao-d-bcm2-adapter-with-key-tool-plus-13

Step 4: Calculating Immobilizer Data


1. After successfully reading both memory sections, return to the Fifth Immobilizer System main interface.

2. Select "Load D/PFLASH to obtain immo data".

Tip: This operation will automatically load both the P-FLASH and D-FLASH files in sequence.

how-to-use-xhorse-ao-d-bcm2-adapter-with-key-tool-plus-14

3. Click "OK" to start the process.

4. Once the data is successfully read, click "OK" again to save it.


how-to-use-xhorse-ao-d-bcm2-adapter-with-key-tool-plus-15

how-to-use-xhorse-ao-d-bcm2-adapter-with-key-tool-plus-16

how-to-use-xhorse-ao-d-bcm2-adapter-with-key-tool-plus-17

how-to-use-xhorse-ao-d-bcm2-adapter-with-key-tool-plus-18

5. After the save is complete, you can proceed with functions like generating a dealer key or performing key learning.


For more information, watch this video:


www.obd2shop.co.uk

Thursday, 14 August 2025

How to Install and Remove the Xhorse BMW G BDC2 Adapter

This guide explains how to safely install and remove the Xhorse BMW G BDC2 adapter from the vehicle module, ensuring a secure connection and preventing damage.


Part 1: Safe Connection


Step 1: Precise Alignment


Align the three positioning pins on the adapter with the three marked points on the BMW G-chassis BDC2 module.

Make sure each pin matches exactly with the corresponding alignment point. 

Tip: Align them one by one to avoid bending the pins.

how-to-install-and-remove-the-xhorse-bmw-g-bdc2-adapter-1

Step 2: Press and Lock

Once aligned, press the adapter downward.

Locate the clips on the adapter and lock them in place to ensure a stable connection.

how-to-install-and-remove-the-xhorse-bmw-g-bdc2-adapter-2

how-to-install-and-remove-the-xhorse-bmw-g-bdc2-adapter-3

how-to-install-and-remove-the-xhorse-bmw-g-bdc2-adapter-4

Part 2: Safe Removal


1. Unlock the clips on the adapter.

2. Place the BMW G-chassis BDC2 module on a clean, flat surface to keep it steady.


Tip: A smooth surface can help prevent scratches or other damage to both the adapter and the module.

how-to-install-and-remove-the-xhorse-bmw-g-bdc2-adapter-5

how-to-install-and-remove-the-xhorse-bmw-g-bdc2-adapter-6

3. Using both hands, press evenly on both sides of the module.

4. The pin header will pop up smoothly and disconnect from the adapter.

5. Lift the adapter straight up to remove it completely.


how-to-install-and-remove-the-xhorse-bmw-g-bdc2-adapter-7

how-to-install-and-remove-the-xhorse-bmw-g-bdc2-adapter-8

how-to-install-and-remove-the-xhorse-bmw-g-bdc2-adapter-9

By following these steps, you can securely install and remove the BMW G BDC2 adapter without causing damage to either the adapter or the vehicle module.


Video guides:

https://youtu.be/tesOy5E_Abo

Thursday, 8 May 2025

Troubleshooting KTP Connection Issue with MLB Tool

Issue Description (Reported by UK Customer):

"Hi, I am having problems communicating KTP with the MLB Tool. It won’t connect. I tried exiting and reconnecting, but the issue remains."

troubleshooting-ktp-connection-issue-with-mlb-tool-1

troubleshooting-ktp-connection-issue-with-mlb-tool-2

troubleshooting-ktp-connection-issue-with-mlb-tool-3

Root Cause & Solution

This issue typically occurs after performing the hardware upgrade for MQB key data reading.


When replacing the original chip inside the MLB Tool with the one provided in the MQB adapter package, it is crucial to ensure proper soldering of the new chip.


Important:

The chip must be securely soldered onto the board, with plenty of solder applied to all legs/pins to ensure stable connectivity and function.


Poor soldering can lead to unstable contact, causing the KTP connection to fail or remain unrecognized by the MLB Tool.


Recommendation:

Open the MLB Tool and double-check the solder joints of the new chip.

If necessary, resolder all legs carefully to ensure a solid connection.

Once done correctly, the KTP communication should work as expected.


www.obd2shop.co.uk

Thursday, 1 August 2024

Xhorse MQB RH850/V850 Adapter + Multi-Prog Read R7F701407

The new Xhorse MQB RH850/V850 Adapter for Multi-Prog Programmer is hitting the market with great anticipation. It can support the VW 4th Gen Johnson Controls 34xx series, MQB-RH850(R7F) series & MQB 34xx series without cutting wires or lifting pins. We need to work with Multi-Prog meanwhile.


Following we'll show how to read the MQB48 R7F701407 locked instrument data process as an example. For those who need immo data calculation, either VVDI2 or Key Tool Plus is optional.

xhorse-mqb-adapter-multi-prog-read-r7f701407-1

xhorse-mqb-adapter-multi-prog-read-r7f701407-2

1. Connection

Open Multi-Prog software,

Device >> MQB48-LOCK(R7F701407)-READ(VW->MQB) >> Details >> Connection diagram


1)Remove these 4 components.

2)Solder the wires to connect the adapter and instrument, and secure them with acetate tape.

3)Once the soldering is successful, connect RH850/V850 Adapter, Multi-Prog, computer and VVDI2.


Remember to power the MULTI-PROG.

xhorse-mqb-adapter-multi-prog-read-r7f701407-3

xhorse-mqb-adapter-multi-prog-read-r7f701407-4

xhorse-mqb-adapter-multi-prog-read-r7f701407-5

xhorse-mqb-adapter-multi-prog-read-r7f701407-6

2. Read MQB48 Data

Crack reading >> OK

*You can check the progress in the bottom left corner, and wait for minutes.

Save file >> Save

xhorse-mqb-adapter-multi-prog-read-r7f701407-7

3. Decode MQB48 Data

Open VVDI2 software,

VW >> Key Learn >> MQB platform instrument immobilizer >> Instrument with locked NEC35xx(MQB48, VDO/JCI) >> Decode immo data >> Yes >> Load the encrypted data just read by Multi Prog.

Save the MQB48 immo data file!


This file can used to make a dealer key or add a key.


The MQB RH850/V850 Adapter is so practical that can significantly reduce the risk of instrument damage.

xhorse-mqb-adapter-multi-prog-read-r7f701407-8

xhorse-mqb-adapter-multi-prog-read-r7f701407-9

xhorse-mqb-adapter-multi-prog-read-r7f701407-10

xhorse-mqb-adapter-multi-prog-read-r7f701407-11

www.obd2shop.co.uk

Sunday, 28 April 2024

(Fixed) VVDI PROG Read NEC3529 Prompts "Adapter invalid"

A few days ago we received a case sharing from a customer about the solution to "VVDI PROG read NEC3529 prompts 'Adapter invalid' ".

Customer's problem: I tried to read the NEC3529 using the XDNP82 adapter and the software still tells me that the adapter is invalid, look at the picture.

all contacts are ok, also on FLMD 3.3V

vvdi-prog-read-nec3529-prompts-adapter-invalid-1

vvdi-prog-read-nec3529-prompts-adapter-invalid-2

vvdi-prog-read-nec3529-prompts-adapter-invalid-3

Later, the customer found the problem himself and successfully solved it:

Problem solved!

The adapter does not work at a voltage of 12V.

The voltage on the power supply must be at least 12.5 V.

Thanks to Jan Sima for sharing with us.

For more technical support, please follow www.obd2shop.co.uk