Problem
I was using Xhorse VVDI MB Tool to erase EIS for a Mercedes Benz, but all basic information and key information go to 0. It said “Erasing EIS...Failed!”, what is the problem? Please help me!
OBD2shop engineer replied.
The reason for VVDI MB Tool erasing EIS failed is because the key password and erase password are all zero. Only to have both passwords can erase EIS successfully.
Thanks to www.obd2shop.co.uk, solved my problem.
Today, I’ll show you how to program Benz 2013 GL450 KeylessGo key with VVDI MB BGA Tool.
Here is the procedure:
1. Read IES data and paste the key password to the corresponding area.
2. Save IES data.
3. Press “OK” to save the HC05 format file.
4. Choose “Prepare Key File”>>“Load EIS File”.
5. Select key position, say “key 5” and “key 7”, and V051 format, then press “Prepare Key File”.
6. Save key data.
7. Go to “Read/Write Key”>>“Identification Key”.
8. Renew key.
9. Select key data file (key 7)
10. Write key.
11. Writing key is successful.
Done!
“I can’t read the data to get the password with Xhorse VVDI MB BGA Tool on an EIS W210. I have tokens to read and that’s okay. But when the reading was done and I was going to decode the password, the VVDI MB Tool cut me off at the start.” one customer gave feedback with a picture and asked for help.
Customer problem:
I can’t read the data to get the password with Xhorse VVDI MB BGA Tool on an EIS W210. I have tokens to read and that’s okay. But when the reading was done and I was going to decode the password, the VVDI MB Tool cut me off at the start.
Solution:
The data was collected incorrectly, please re-collect again to calculate the key password.
The problem was solved! VVDI MB Tool can read the Mercedes Benz W210 password successfully now.
Thanks to Xhorse engineer.
Any questions about the VVDI MB BGA Tool please contact us.
