Wednesday, 30 April 2025

Guide to Replacing the MLB Tool Chip for MQB Key Data Reading

To enable the MQB key data reading feature, you need to perform a hardware upgrade by replacing the internal chip of the Xhorse MLB Tool. Please follow the steps below carefully:


Step 1: Disassemble the Device

1. Remove the outer casing: Unscrew the four corner screws securing the device’s casing and carefully take off the cover.

2. Access the internal board: Locate and unscrew the screws holding the main board in place.


replace-mlb-tool-chip-for-mqb-key-data-reading-1

replace-mlb-tool-chip-for-mqb-key-data-reading-2

replace-mlb-tool-chip-for-mqb-key-data-reading-3

Step 2: Replace the Chip


1. Remove the existing chip: After exposing the front side of the board, gently detach the original chip using appropriate tools.


2. Install the enhanced chip: Insert the upgraded chip into the designated slot, ensuring proper alignment and secure contact.


replace-mlb-tool-chip-for-mqb-key-data-reading-4

replace-mlb-tool-chip-for-mqb-key-data-reading-5

replace-mlb-tool-chip-for-mqb-key-data-reading-6


Step 3: Reassemble the Device

1. Secure the board: Reattach the screws to fix the board back into its original position.

2. Close the casing: Replace the outer casing and tighten the four corner screws.

replace-mlb-tool-chip-for-mqb-key-data-reading-7

⚠️ Important Notes

During all future use, please ensure the device and the adapter are powered on.


For detailed function usage, please refer to the MQB Key Function Tutorial.


replace-mlb-tool-chip-for-mqb-key-data-reading-8

replace-mlb-tool-chip-for-mqb-key-data-reading-9

The hardware upgrade will be completed successfully by following these steps, enabling seamless operation of the enhanced MQB key data reading functionality.

www.obd2shop.co.uk